Short answer: Start with the closed garage door. Scorpions commonly use gaps at the bottom, sides, top corners and nearby utility entries.
Check for daylight first
With the door closed and lights off, look for daylight at the bottom seal, both sides, header and lower corners. A new bottom seal does not fix an open side or corner. An uneven slab can leave one section open even when the rubber looks fine.
Inspect the unfinished edges
Check A/C lines, conduit, cable entries, water-heater penetrations, the door into the home and torn screens. Also inspect the base of stucco and the garage-side weep-screed area. One outside gap can lead into a wall void.
Know when it is a pattern
One scorpion may be a traveler. Repeat sightings, a scorpion near the interior door or activity after new weatherstripping suggest the whole perimeter needs a closer look.
Common questions
Can scorpions get in under a garage door?
Yes. If daylight is visible, the opening deserves attention. Check the side and top weatherstripping too.
Do I need a new garage door?
Usually not. The issue is often a seal, corner gap or nearby penetration rather than the door itself.