Short answer: Drains and low openings can be part of a rattlesnake route. Protect the perimeter without stopping water from doing its job.
Walk the perimeter at ground level
Look where block meets metal fence, mesh meets a gate post, a drain passes through a wall, or a hose was routed through an opening. These transitions are easy to miss.
Water still has to move
Do not fill a drain with foam or masonry because it is low. A bad fix can redirect monsoon water or fail in desert heat. The right detail depends on the wall, grade and drainage path.
Check after yard changes
Landscaping, irrigation, erosion, rock piled against a barrier and hoses pushed through openings can create a new weak point. Recheck after major work and monsoon season.
Common questions
Can a snake use a block-wall drain?
It can be a weak point if left open or oversized. It belongs in the complete perimeter inspection.
Should I fill every drain?
No. Drainage still has to function safely.